Metal Transfer Sticker

Metal Transfer Sticker

Metal transfer sticker: electroformed nickel 0.04-0.10mm, 3M 9448A adhesive, OEM custom logo, MOQ 500. Salt-spray 48h, peel 15 N/25mm, UV 500h. Qingdao factory, 12 years, 800,000 pieces/day.
Send Inquiry
Description
Technical Parameters

Qingdao Taizhida Electronics Co., Ltd. is one of the most reliable manufacturers and suppliers of metal transfer sticker in China, also supports customized service and OEM service. If you're going to buy discount metal transfer sticker, welcome to get quotation from our factory. For price consultation, contact us.

 

 
Thin Nickel Metal Sticker Logo

Product Definition

A metal transfer sticker is a thin electroformed nickel label with pressure-sensitive adhesive on the back. The nickel thickness ranges from 0.04mm to 0.10mm. The adhesive is 3M 9448A by default, with Tesa 4965 and 3M 7533 as alternatives. The sticker is supplied as individual die-cut pieces on a release liner, ready for hand or automated application.

The metal is pure electroformed nickel, not printed film, not metallised plastic. The decorative surface is finished through PVD for colour and mechanical embossing for texture. The product is intended for permanent branding on rigid substrates.

Custom Options

The metal transfer sticker can be customised in the following ways without affecting the standard lead time: artwork (any vector logo or text), thickness within the standard range, colour within the six standard options, and surface texture within the six standard options.

Artwork is supplied in AI, PDF, EPS, or PNG (300 dpi minimum). The factory redraws raster artwork in vector format free of charge, with a 1-2 working day extension to the sample lead time.

Sample lead time: 3 working days from artwork approval. Bulk lead time: 5-7 working days from sample sign-off. Sample cost is borne by the factory if the trial order proceeds.

Thin Nickel Metal Sticker Logo
Nickel Metal Logo Label Sticker
 

Compatible Substrates

The metal transfer sticker with 3M 9448A adhesive is compatible with the following rigid substrates: glass, hard plastics (ABS, PC, acrylic, hard PVC), painted metal, powder-coated metal, anodised aluminium, ceramic, and painted wood. Bond strength on these substrates exceeds 15 N/25 mm after 72 hours at 25°C.

For low-surface-energy substrates (polypropylene, TPU, soft-touch coatings, silicone, fabric), the default 3M 9448A adhesive does not provide sufficient bond. The alternative adhesive Tesa 4965 is recommended for polypropylene and TPU; 3M 7533 is recommended for soft-touch coatings. Compatibility with specific substrates should be confirmed by sample test on the actual material before bulk order.

The metal transfer sticker is not suitable for flexible substrates (fabric, rubber, soft-touch films), for substrates that flex under the sticker during use, or for surfaces exposed to temperatures above 85°C continuous or below -30°C continuous.

 

FAQ

Q1: What is the difference between a metal transfer sticker and a printed label?

A: A printed label is ink on a plastic film. A metal transfer sticker is solid electroformed nickel, 0.04-0.10mm thick. The metal does not fade, yellow, or peel under normal indoor conditions. The expected service life is 5+ years indoors, 2+ years outdoors with UV-protective coating.

Q2: What thickness should I select for my application?

A: 0.04mm for short-term campaigns on rigid substrates, 0.06mm for general indoor branding, 0.08mm for premium consumer electronics, 0.10mm for industrial or outdoor use. Substrate curvature below 15mm radius requires 0.04mm; curvature above 15mm radius accepts any standard thickness.

Q3: Can the metal transfer sticker be applied to curved or flexible substrates?

A: Yes on curved substrates with a radius of 15mm or wider, using 0.04-0.06mm thickness. No on flexible substrates (fabric, rubber, soft-touch films) or on tight curves (radius below 15mm) - the metal will crease at the bend.

Q4: What is the minimum order quantity?

A: 500 pieces per artwork. The 500-piece minimum is the production line changeover threshold; below 500 pieces, the per-piece cost increases and the lead time extends. Orders above 500 pieces per artwork use the standard per-piece price and the standard 5-7 working day bulk lead time.

 

 

 

 

Hot Tags: metal transfer sticker, China metal transfer sticker suppliers, manufacturers, factory, Electroformed Nickel Metal Sticker, Perfume Metal Nickel Sticker, Electroformed Metal Sticker Label, Gold Metal Nickel Sticker Logo, Home Appliance Metal Nickel Sticker, Metal Nickel Sticker Sheet

Send Inquiry
Send Inquiry