Aluminum Plate Sticker

What are the precautions when using aluminum plate stickers?

When using aluminum plate stickers (also known as label stickers, reflective films, etc.), the following matters need to be noted to ensure the firmness, aesthetics and functionality of the stickers:

1. Preparation before stickers
Cleaning the aluminum plate surface:
The aluminum plate surface must be clean and free of grease, dust or other dirt to avoid affecting the adhesion of the stickers.
You can use alcohol or other suitable detergents to wipe it and ensure that the surface is completely dry before applying the stickers.
Stickers environment:
It is best to apply stickers in a dry and dust-free environment to avoid dust or moisture affecting the sticker effect.
The temperature in the operating workshop should be moderate to avoid too low or too high temperature to reduce the stickiness of the stickers.
2. Precautions during the sticker application process
Avoid touching the sticker surface directly:
When removing the sticker from the backing paper, avoid touching the sticker surface directly with your fingers to prevent fingerprints or other dirt from remaining on the sticky surface.
Correct paste:
Gently apply the sticker to the aluminum plate surface according to the required position, and then press it smoothly from the middle to the surroundings with your hands or tools such as scrapers to ensure that the sticker is in full contact with the aluminum plate surface to avoid bubbles or wrinkles.
Positioning and adjustment:
During the sticker process, you can use tape or other positioning tools to position the sticker to ensure the accuracy of the sticker position.
If the sticker position is incorrect, you can adjust it within a certain period of time (such as within 24 hours, according to the sticker instructions), but avoid frequent movement or tearing to avoid affecting the stickiness of the sticker.
3. Maintenance after sticker application
Avoid tearing and resetting:
After the sticker is applied, avoid tearing or resetting it within a short period of time (such as within 24 hours) to avoid affecting the stickiness of the sticker.
Prevent sun exposure and high temperature baking:
The sticker should be avoided from being exposed to strong sunlight or high temperature environment for a long time to prevent the sticker from fading, deformation or reduced stickiness.
Avoid strong friction:
When using aluminum plates, avoid strong friction or scratching of the sticker to prevent the sticker from being damaged or falling off.
Regular inspection and maintenance:
Check the sticker regularly. If the sticker is found to be falling off, warping or damaged, it should be repaired or replaced in time.
4. Other precautions
Choose the right sticker:
Choose the right sticker type according to the purpose, environment and requirements of the aluminum plate, such as reflective film, ordinary label sticker, etc.
Follow the sticker instructions:
When using stickers, you should carefully read and follow the operating instructions and precautions in the sticker instructions to ensure the correct use of the stickers and the best results.
In summary, there are many aspects that need to be paid attention to when using aluminum plate stickers, including preparation before sticker application, precautions during sticker application, maintenance after sticker application, and other related precautions. Following these precautions can ensure the firmness, beauty, and functionality of the stickers, thereby meeting the requirements for the use of aluminum plates.